Bathroom Tile Installer in Meridian, Idaho
Floors, wet walls, and the band at the tub. One bath, one plane, one bid.
Free estimate.
- Free estimates
- Treasure Valley
- Local crew
- One number
This job covers
- Guest-bath floors on production slabs
- Primary baths with wet walls and floor
- Powder rooms and half baths
Bathroom Tile Installer in Meridian, Idaho
Meridian Quality Tile is the bathroom tile installer in Meridian that sets floors, wet walls, and the band at the tub as one room. Homeowners call when the vinyl at the toilet stains, the builder ceramic chips, or a primary bath needs a wear surface that can take water.
Call (208) 974-5221 with the bath size and a photo of the floor. We quote the room after we see the flange and the wet walls.
Bathroom Tile Installer Options for Meridian Properties
Guest-bath floors on production slabs
A 40-square-foot guest bath is the usual south Meridian job. We pull the toilet, flatten the slab, and set a porcelain field with a tight joint. The door height and the flange height decide extra underlayment. A thick uncoupling mat can lift the toilet too high.
Primary baths with wet walls and floor
Larger baths add a stall or a tub wall in the same finish. We run a layout that shares grout color even when the floor tile is larger than the wall. Movement joints at the curb and the corners. The floor dies into a profile, not a smear of caulk over grout.
Powder rooms and half baths
A powder room is all cuts: toilet, pedestal, and a tiny field. Small mosaics or a 6x6 hide the layout better than a 12x24. We still flatten. Lippage in a 20-square-foot room reads from the hall.
How We Handle Bathroom Tile Installer Work in Meridian
- We measure the room, the stall, and the flange. Photos of the door swing help.
- We demo the old floor or vinyl, then flatten and waterproof the wet planes.
- Layout starts from the doorway so slivers do not greet you. Tile is set in thinset.
- Grout, sealant at changes of plane, and the toilet reset after cure.
Materials and Methods
Bathroom floors want porcelain or a ceramic with a real PEI wear rating, set in A118.4 or A118.15 thinset. Wet walls follow the shower assembly: backer, ANSI A118.10 membrane, then tile. Uncoupling membrane on a cracked slab. TCNA EJ171 joints at perimeters. A metal or PVC edge profile at the hall so the bath floor does not chip. Sanded grout on floors, unsanded on tight wall joints. Silicone, not grout, at the tub deck and the stall corners. We check toilet-flange height before the mortar bed gets thick. ANSI A108 is the setting method. The Handbook is the detail book.
What Bathroom Tile Installer Work Costs in Meridian
Angi puts ceramic tile projects around $1,300 to $7,500, averaging near $4,800, and $12 to $45 per square foot. HomeAdvisor lists bathroom floors near $300 to $1,300 and showers $1,800 to $5,000 when the stall is in the same room. Fixr floor sets often run $8 to $14 per square foot on a ready surface. Three things move a bath bid: room size, wet-wall area, and whether the toilet and vanity come out. We quote the bath. Those numbers are guides, not our price.
Builder baths in Cadence and The Oaks North
Production primary baths in those plats share a plan: a 5-foot tub or stall, a small water closet, and a slab that was never meant for 24-inch plank. Buyers swap the vinyl and the 6x6 builder ceramic after move-in. The flange was set for vinyl thickness. A porcelain floor plus a membrane can sit too high for the closet bolts.
We dry-fit the height before we commit to a mat. Sometimes the answer is a thinner crack-isolation sheet, not a full uncoupling board. Sometimes the closet flange needs an extension, which is a plumber. We say that before thinset.
HOA packets in those streets care about exterior paint, not bath tile. Parking a mixer on the driveway on a trash day still matters. West-facing baths cook after a July shower with the fan off. That is a grout and ventilation issue, not a reason to skip membrane.
Call (208) 974-5221 with bath photos and the tile size you want on the floor.
Questions
How do I get a bathroom tile installer estimate in Meridian?
Call or text with the bath size, a photo of the floor, and whether the stall is in the same room. Say if you already bought tile. We look at the slab, the toilet flange height, and the wet walls. Guest baths and primary baths bid differently. We quote the room as a set.
Do you tile the floor only, or walls too?
Either. A floor-only guest bath is common in south Meridian plats. Primary baths often add wet walls and a vanity backsplash. Mixing three tile bodies in one small room fights the layout. Bring the three boxes if you already picked them. We will say if the sizes fight.
Will the toilet and vanity come out?
The toilet comes up for a real floor set. Vanities often stay if the tile dies at the toe-kick. A full-height wall set needs the vanity out. We write that on the quote so you can plan a day without that bath. Supply stops stay dry while we work.
Is a bathroom tile installer the same as a shower-only crew?
The stall is the wettest part. The floor, the water closet, and the vanity wall still need flatness and the right mortar. We set the whole room so the grout color and the plane match. A stall crew that never checks the floor leaves a lip at the curb.
How do you handle builder baths in new plats?
Cadence, The Oaks North, and Reflection Ridge baths are small, with a 5-foot tub or stall and a vinyl floor the buyer wants gone. We check the slab, the flange, and the wet wall. Builder greenboard in the spray zone comes off. We do not tile over a paper face in the water.
Can you match the hall tile into the bath?
If you still have boxes, yes. If not, we set a clean threshold and a new field. Dye lots change. Forcing a 10-year-old porcelain to blend next to a new carton looks worse than a planned break. We would rather cut a schluter at the door.
Ready for a tile estimate in Meridian?
Showers, floors, backsplashes. Free estimate, no obligation.